1

Project Evaluation

When Stadium Seating Enterprises, Inc. (SSE) is contacted prior to the development of architectural drawings for your new construction or retrofit project; we are pleased to consult with owners and builders to determine the optimum stadium seating configuration, riser height, and platform depth for each specific job.

In this initial stage, based on the specific objectives of the customer, SSE will recommend the proper PREFOAM Stadium Seating Riser System to fulfill the project goals and provide assistance in setting the criteria for the platform design.

2

Design Assistance

As a part of the initial evaluation phase for new construction or renovation projects, SSE can review conceptual layouts of the stadium seating design prepared by the owner or architect to insure that the system design is fully optimized and that the PREFOAM Stadium Seating Riser System is being utilized economically and efficiently.

3

COST MANAGEMENT

SSE will estimate the cost of engineering shop drawings, foam and steel material and delivery of the system components for the PREFOAM Stadium Seating Riser System. Costs are calculated on a cost per square foot basis for the overall project as well as on a cost per auditorium, seat or cost per platform square foot.

4

ENGINEERING DESIGN/SHOP DRAWINGS

As a part of our services for new construction or renovation projects, SSE will prepare a complete set of shop drawings for the installation of the PREFOAM Stadium Seating Riser System.

SSE provides shop drawings as a part of our services for all PREFOAM Stadium Seating Riser System designs and as an additional service, we can recommend a third party structural engineer to provide stamped structural engineering documents for the riser systems depending on the requirements of the reviewing agency.

5

SYSTEM FABRICATION

SSE has professional partnering relationships with key EPS Geofoam and Steel Material Suppliers throughout North America. Depending upon the location of each new project, working with our Regional Hub Manufacturing Partners, SSE will negotiate material purchase and delivery from a supplier/fabricator in close proximity to the project site to minimize delivery costs and reduce overall adverse impact on the environment due to excessive shipping distances.  For more information and the location of our manufacturing partners, please refer to the Just-In-Time Manufacturing section of this website.

6

TEAM BUILDING

For customers seeking a full service team of professionals, due to our experience in the industry, SSE can work with you to assist in the selection the most experienced and capable Architectural, Engineering, Construction and FF&E Consultants who can deliver the complete project.

Leave a Reply